|
|
|
Products
CAPG247 LTPG247 |
|
|
| Product name：CAPG247 LTPG247 |
| Item：CAPG247 LTPG247 |
| Details： |
 |
- Max printing speed: 150mm/sec
- Platen latch function
- Windows® drivers (XP/Vista)*32bit
- OPOS driver(XP)*In use with IFG001-03SK/UK
- Linux driver
   |
 |
| Model |
CAPG247 |
LTPG247 |
| Printing |
Method |
Thermal line dot printing |
| Number of dots/ line |
432 |
| Resolution(dots/mm) |
8 |
| Paper width(mm) |
58 |
| Printing width(mm) |
54 |
| Speed(mm/sec)max |
150 |
| Paper path |
Curved |
| Detection |
Head temperature |
By thermistor |
| Platen position |
By mechanical switch |
| Out of paper |
By photo interrupter |
| Cutter home position |
By mechanical switch |
- |
| Power supply(V) |
Operation voltage(Vdd) |
3.14 to 3.46 / 4.75 to 5.25 |
| Operation voltage(Vp) |
21.6 to 26.4 |
| Peak current(A) |
Head |
5.2 (26.4V / 288dots) |
| Motor |
0.4 / 0.37 *1 |
| Cutter |
0.5 |
- |
| Auto cutter |
Method |
Slide type |
- |
| Paper thickness (μm) |
54 to 80 *2 |
- |
| Cutting type |
Full cut / Partial cut(Leave center point) |
- |
| Operating time(sec/cycle)max |
0.5 |
- |
| Cutting pitch(mm)min |
10 |
- |
Cut frequency
(cut/min)max |
30 |
- |
| Service life |
Pulse activation(pulse) |
100million |
| Abrasion resistance(km) |
100*2 |
| Life(cut) |
1,000,000 |
- |
| Operating temperature(°C) |
0 to 50 |
| Dimensions(W x D x H mm) |
80.5 x 65.0 x 22.2 *3 |
79.5 x 43.0 x 17.4 *3 |
| Mass(g) |
Approx.180 |
Approx.80 |
|
*1 2-2 phase and W1-2 excitation method *2 Use recommended thermal papers
*3 Excluding protrusion
Windows® is the registered trademark of Microsoft Corporation(USA).
|
Interface
| Model |
IFG001-03SK |
IFG001-03UK |
|
| CPU |
PTG00P01 |
|
| Thermal Printer |
CAPG247, LTPG247 |
|
| Operating voltage(V) |
Vp:21.6 to 26.4 |
|
| Character matrix(HXW dots) |
16 dots characters : 16x8, 16x16
24 dots characters : 24x12, 24x24
|
|
| |
| Character type |
Extended graphics character set |
Yes |
Yes |
|
| Katakana character set |
Yes |
Yes |
|
| Optional Font |
Yes |
Yes |
|
| Downloaded Character |
Yes |
Yes |
|
| User-defined Character |
Yes |
Yes |
|
| JIS 1&2 level Kanji |
Yes |
Yes |
|
| |
| |
| Communication interface |
Serial(RS-232C) |
USB |
|
| Dimensions(W x D x H mm) |
75.0 x 75.0 x 16.0 |
|
CPU
| Model |
PTG00P01 |
| Thermal Printer |
CACG247, LTPG247 |
| Package form |
128pin QFP |
| Operating voltage(V) |
Vp: 21.6 to 26.4
Vcc: 3.0 to 3.6 |
| Operating frequency(MHz) |
18.43 +/- 0.5% |
| Configuration |
C-MOS LSI |
| Communication interface |
Parallel, Serial, USB |
| Character type |
Extended graphics character set,
Other characters is availabe with CGs*1 or external ROM |
| Character matrix(H x W dots) |
16dots characters : 16 x 8, 16 x 16
24dots characters : 24 x 12, 24 x 24
|
| Dimensions(W x D x H mm) |
22.0 x 16.0 x 3.15 |
| *1 CG ROM: Japanese |
Winder Unit
| Model |
WU282 |
| Thermal printer |
LTPG247 |
| Paper width (mm) |
58 |
| Paper thickness (μm) |
70 to 80 |
| Outside diameter of paper roll (mm)max |
Φ83 |
| Inside diameter of paper roll (mm)min |
Φ20 |
| Operating voltage (V) |
21.6 to 26.4 |
| Speed (mm/s)max |
220 |
| Life (Operating hours) |
160 |
| Dimensions(W x D x H mm) |
87.8 x 92.0 x 97.6 |
| Mass (g) |
Approx.136 |
|
 |
[Next：Thermal bar for various manufacturers KF2002-C1SXA]→
|
|
