YJX-NP80A Custom


Model YJX-NP80A

print
Printing method Line thermal printing
Dot matrix 640dots
Printing speed 250mm/s (max)
Print width 80mm (max)
Paper width 80mm (optional 60mm)
Paper thickness 60 - 150um
Feed mode Automatic paper suction (180° horizontal)
Cutting method, full cut, half cut
Print length 100KM
Print format: white, underline, italic, bold, etc.
Cutter life 1 million times
Print baud rate 9600, 19200, 38400, 115200
Single sheet printing minimum length 80mm
Character ASCII 9*17, 12*24
Chinese 24*24 points
Detection print head temperature temperature sensor
Lift bar detection micro switch
Paper detection mechanical sensor
Paper detection
Paper will be tested. Reflective photoelectric sensor
Black mark detection
Over-paper detection
Probe detection
(transmitting, receiving) through-beam photoelectric sensor
拽 paper, paper jam detection
Condition Operating voltage 24 ± 5% V
Average current 2A@24V (effective print points 37.5%)
Peak current 7.5A
Communication interface RS232, USB
Thermal paper specifications Thermal paper rolls
(The heat sensitive layer is located on the outer side of the roll paper)
Environment Operating temperature -10 - 60 °C (no condensation)
Operating humidity 20% - 80% RH (80% RH at 40 °C)
Storage temperature -20 - 70 ° C (no condensation)
Storage humidity 10% - 90% RH (90% RH at 50 °C)
Dimensions Depth Approx. 296mm Paper holder 45° upwards (for example, paper roll 150mm)
Width about 145mm
Height about 161.5mm paper holder 45° upwards (for example, paper roll 150mm)
Weight about 1kg (without paper roll)