LTP9000 Series

LTP9247

LTP9347

This printing mechanism series, available in three different paper widths, perfectly meets the requirements of heavy duty, outdoor, unmanned applications, such as kiosk terminals, ATMs, gasoline, POS and parking applications. 

Since this mechanism is built in our heavy duty CAP9000 series it also can accommodate very large paper rolls and can print on a paper thickness of up to 150µ (specified thermal paper).

Serial and USB interface boards are available. 

Features

• Wide operating temperature -20°C to +60°C
• Ultra high speed printing: up to 250 mm/s at 8 dots/mm
• Highly reliable lifetime: 150 million pulses or more
• 2-inch, 3-inch and 4-inch version available
• Each version is available with a straight or curved paper path
• Release function of the platen for easy head maintenance

Download

Max printing speed: 250mm/sec Compact 2", 3" heavy-duty mechanism Support thick paper: up to 155μm *1 (straight path model only) Operation temperature: -20°C to 60°C Various drivers

Model		CAP9247	CAP9347
Printing	Method	Thermal line dot printing
	Number of dots/line	448	640
	Resolution(dots/mm)	8
	Paper width(mm)	58 / 60	80 / 82.55
	Printing width(mm)	54/56	76/80
	Speed(mm/sec)max	250
	Paper path	Curved / Straight
Detection	Head temperature	By thermistor
	Out of paper	By photo interrupter
	Mark position	By photo interrupter
	Platen position	By mechanical switch
	Cutter position dete	By mechanical switch
Power supply(V)	Operation voltage (Vdd)	4.75 to 5.25
	Operation voltage (Vp)	21.6 to 26.4
Peak current(A)	Head	5.9(26.4V/128 dots)
	Motor	1.0
	Cutter	1.2
Auto cutter	Method	Slide type
	Paper thickness (μm)	57 to 155*1
	Cutting type	Full cut / Partial cut(Leave center point)
	Operating time(sec/cycle)max	2
	Cutting pitch(mm)min	10
	Cut frequency(cut/min)max	30
Service life	Pulse activation(pulse)	150 million
	Abrasion resistance (km)	150*1
	Paper cutting(cut)	1.000.000
Operating temperature (°C)		-20 to 60
Dimensions(W x D x H mm)		89.5 X 50.0 X 30.0 *2	112.0 X 50.0 X 30.0 *2
Mass(g)		Approx.240	Approx.290
Driver		Windows® XP/Vista/7(32bit/64bit),OPOS(XP),Linux
*1 Use recommended thermal papers *2 Excluding protrusion Windows® is the registered trademark of Microsoft Corporation (USA).

Model		LTP9247	LTP9347
Printing	Method	Thermal line dot printing
	Number of dots/line	448	640
	Resolution(dots/mm)	8
	Paper width(mm)	58 / 60	80 / 82.55
	Printing width(mm)	54/56	76/80
	Speed(mm/sec)max	250
	Paper path	Curved / Straight
Detection	Head temperature	By thermistor
	Out of paper	By photo interrupter
	Mark position	By photo interrupter
	Platen position	By mechanical switch
	Cutter position	-
Power supply(V)	Operation voltage (Vdd)	4.75 to 5.25
	Operation voltage (Vp)	21.6 to 26.4
Peak current(A)	Head	5.9(26.4V/128 dots)
	Motor	1.0
	Cutter	-
Auto Cutter	Method	-
	Paper thickness (μm)	-
	Cutting type	-
	Operating time(sec/cycle)max	-
	Cutting pitch(mm)min	-
	Cut frequency(cut/min)max	-
Service life	Pulse activation(pulse)	150 million
	Abrasion resistance (km)	150*1
	Life (cut)	-
Operating temperature (°C)		-20 to 60
Dimensions(W x D x H mm)		88.8 X 50.0 X 29.7 *2	111.25 X 50.0 X 29.7 *2
Mass(g)		Approx.150	Approx.180
Driver		Windows® XP/Vista/7(32bit/64bit),OPOS(XP),Linux
*1 Use recommended thermal papers *2 Excluding protrusion

Interface