FTP-622MCL101 (front paper insertion)
FTP-622MCL102 (bottom paper insertion)
FTP-622MCL353 (front paper insertion)
FTP-622MCL354 (bottom paper insertion)




FTP-622MCL101/102/353/354  FTP-632MCL101/102/353/354
■ PART NUMBERS
■ GENERAL SPECIFICATIONS
*1: FTP-622DCL411 is ANK supported only
*2: FTP-622DSL438 has FLASH memory and can print high speed images
*3: Supports Kanji and parallel and serial interfaces
N r ame Part Numbe
Printer Mechanism
FTP-622MCL101 (front paper insertion)
FTP-622MCL102 (bottom paper insertion)
Printer Mechanism with Cutter
FTP-622MCL353 (front paper insertion)
FTP-622MCL354 (bottom paper insertion)
Interface Board
P * arallel FTP-622DCL411
1
S * erial FTP-622DSL438
2
(Gothic, Kanji)
L * SI (MCU) FTP-622CU201
3
Interface Cable
Parallel
(Centronics)
FTP-441Y201
S 1 erial (RS-232C) FTP-622Y30
Cable
P 1 ower FTP-622Y40
H ) ead FTP-622Y801 (FFC preassembled to mechanism
(Continued)
Part number FTP-622MCL101/102/353/354
Printing method Thermal-sensitive line dot method
Dot structure 432 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 54 mm
Number of columns ANK 36 columns (12X24 dot font max.)
Paper width 58mm±         60mm±
Paper thickness 60 to 100 µ m (there may be exceptions)
Printing speed 100mm/s (800 dotlines/s maximum at black-white image batch printing
Character types Alphanumeric KANA :159
International :195
JIS Kanji (Kanji CG loaded board) :approx. 6800
36 columns
18 columns
54 columns
27 columns
Interface Centronics / RS-232C standard
Item Specifications
Character,
dimensions(H×W),
number of
characters
0
1
0
1
12×24 dots,(1.5×3.0mm)
24×24 dots,(3.0×3.0mm)
 8×16 dots,(1.0×2.0mm)
16×16 dots,(2.0×2.0mm)3
FTP-622MCL101/102/353/354  FTP-632MCL101/102/353/354
For head
24 VDC ±5% 1.1 (1.7A)
(24V Rav1500Ω, 25% printing ratio)
For printer motor 24VDC±5% 1A maximum
For cutter motor 24VDC±5% 1A maximum
For logic 5VDC±5% 0.5 A maximum
Printer Mechanism 82 (W) × 48 (D) × 20 (H) mm
Dimensions
Mechanism with cutter 97 (W) × 57 (D) × 38(H) mm
Interface board 131 (W) × 89 (D) × 24 (H) mm
Weight Printer Mechanism Approximately 81g
Mechanism with cutter Approximately 280g
Life Head Pulse durability: 1 × 10
8
 pulse/dot (using Fujitsu Components' standard
    driving method)
Wear resistance: 50 km (at  25% print ratio)
Cutter 3x10
3
times minimum 5x10
5
times minimum
Operating temperature +5 to +40°C (Guarantee, but can operate between 0°C to +50°C)
Operating humidity 20 to 85% RH (no condensation)
Storage temperature –20 to +60°C (excluding paper)
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor
Detection Paper out/Mark detect By photointerrupter
Head release By slide switch
2 color paper (blue/black) PB770 (Mitsubishi paper)
                       (red/black) PB670 (Mitsubishi paper)
High sensitivity paper TF50KS-E4 (Nippon paper)
Standard paper TF60KS-E (Nippon paper), FTP-020P0104 (58mm)
PD150R (Oji paper), FTP-020P020P0701 (58mm)
Medium term paper TP60KS-F1 (Nippon paper),FTP-020P0102(58mm)
PD170R (Oji paper)
P220VBB-1 (Mitsubishi paper)
PD160R-N (Oji paper)
Long term paper AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)