Standalone Printer Unit
Standalone Printer Unit
DPU-414
- Max printing speed: 52.5 character/sec
- Available international character
- Interface: Serial and parallel
| Model |
DPU-414-50B |
| *1 Use recommended thermal papers. *2 Excluding protrusion. |
| Printing |
Method |
Thermal serial dot printing |
| Number of dots/line (H×W) |
9 × 320 |
| Paper width (mm) |
112 |
| Printing width (mm) |
89.6 |
| Speed (character/sec) max |
52.5 |
| Character matrix (H×W dots) |
9 × 7 |
| Character size (H×W mm) |
2.5 × 1.9, 2.5 × 0.9 (Condensed) |
| Number of columns |
40, 80 (Condensed) |
| Character type |
Extended graphics character set, Alphanumeric, International characters, Katakana character set |
| Power supply (V) |
Option: Specified AC adapter, Ni-MH battery |
| Battery |
Without (option) |
| Communication interface |
Parallel (36pins Amphenol), Serial (9pins D-SUB) |
| Input buffer |
28K bytes |
| Command |
ESC/P™ conformity |
| Cutting |
Tear bar |
| Operating temperature (˚C) |
0 to 40 |
| Service life (line) |
500,000*1 |
| Dimensions (W×D×Hmm) |
160.0 × 170.0 × 66.5 (printer unit only)*2 |
| Mass (g) |
Approx. 580 (without Battery) |
| Standard |
FCC, CE, VCCI, CCC |
| Option |
AC adapter, Battery |
Serial interface specification
| Item |
Specification |
| Baud rate |
75, 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200bps |
| Data bit |
7bits, 8bits |
| Parity bit |
Odd, Even, or None |
| Stop bit |
1bit |
| Control method |
H/W BUSY, Xon/Xoff |
Parallel interface specification
| Item |
Specification |
| Synchronization |
Synchronized with STROBE signal |
| Handshaking |
Synchronized with ACK and BUSY signal |
| Signal level |
TTL level |
PAGE TOP
|
