|
|
|
产品展示
RONDCOM40C圆柱度仪 RONDCOM30C圆柱度仪 |
|
|
| 产品名称：RONDCOM40C圆柱度仪 RONDCOM30C圆柱度仪 |
| 产品编号：RONDCOM40C圆柱度仪 RONDCOM30C圆柱度仪 |
| 详细说明： |
RONDCOM40C圆柱度仪特点：采用直线度为0.15µm/100mm（0.3µm/350mm）的高精度·高耐久性陶制立柱、可以进行直线度、圆柱度、直角度的测量。
确保了平行度精度
确保了转轴心和立柱的平行度2µm/350mm。实现了圆柱度、直角度、斜度的高精度测量。
采用高精度静压空气轴承
回转机构部分采用静压空气轴承，具有该等级最大的耐负荷性，可确保长期的高转动精度。
具有支持调中心·调垂直功能，便于操作可使相对于回转轴心的测量物轴心×以及Y轴方向的偏心量、倾斜量在液晶面板上以条形曲线显示出来，操作简便。
RONDCOM40C圆柱度仪具有自动测量功能
各轴具有电动自动停止功能，可自动进行移动·测量·退避等动作。是生产现场进行批量生产重复测量工作时非常有效的功能。
具有自动偏心修正·倾斜修正功能
对进入测量范围内测量物的偏心量、倾斜量进行解析、自动修正、可大幅度减少繁琐的调整操作。
可以进行中心定义法的组合
对于同心度·直角度等测量项目，可以自由选择组合4种中心定义法进行数据解析。
标准配备有高速图表打印机
通过使用记录纸宽度为104mm的高速图表打印机，可以随时得到高分辨率的记录。而且由于同时记录了各种测量条件以参数结果，可直接作为数据表使用。
标准配备有IC卡单元
Rondcom 40C/30C
Compact Desktop Roundness Measuring Instruments with Superior Cost Performance and Analysis Functions of a High Class Machine
 
Highly Rigid Static-Pressure Air Bearings
Static-pressure air bearings with a proven track record have been adopted for the rotation mechanism, providing the highest load resistance and extended rotation precision in this class of machine.
Operator-Friendly Centering/Tilting Support Function
Eccentricity in the X and Y directions of the center of the workpiece axis with respect to the center of the rotating axis, as well as tilting are displayed in bar graphs on the LCD panel. This simplifies alignment.
Automatic Measuring Function
Each axis is provided with a motorized auto stop function, automating movement, measurement and retract operations. This function is extremely effective for repeated measurements of mass produced workpieces on the production floor.
Automatic Magnification Calibration Function
This function simplifies calibration of magnification when the stylus is changed to accommodate different workpieces profiles. The sensitivity for four types of detectors can be registered.
Automatic Eccentricity Correction/Tilt Correction Function
Analyzing the eccentricity and tilting of the workpiece in the measuring range and automatically correcting for it have dramatically reduced the time and effort needed to perform alignment.
Combination of Center Line Definition Methods
Four types of center line definition methods can be freely selected and combined for concentricity, squareness and other measuring items.
Standard High Speed Graphic Printer
A high speed graphic printer that uses recording paper with a recording width of 104mm immediately provides a high-resolution record of measurement. Since various measuring conditions and parameter results are recorded at the same time, it can be used as a data sheet.
Standard IC Card Unit
The provision of an IC card unit enable all measuring condition settings and measured data to be stored. Special programs that are provided in response to customer requests can be loaded using the IC card unit.
|
 |
[下一个产品：Ribbon Printer For MAVERICK M400 Carbon Ribbon]→
|
|
